Command for handling popup window

This topic has 2 replies, 2 voices, and was last updated 6 years, 1 month ago by paulglagla.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
2019 April 16 at 15 h 29 min #2439

nava790
Participant

Hello sir,

Is there any command which we can use for handling the pop up window(suppress the pop up window) in order to automate, opening a video file from a different application into the image grabber.I have looked into the ‘commands of imageGrab 5.0.6’ page, but I could not find one which supports the suppress function.

Now I am able to open a video file using the ‘o’ switch which is mentioned in the commands of ImageGrab 5.0.6 en page, but before reaching the player a pop up window is appearing to press OK.

I would like to skip this ‘OK’ Pop-up window in order to automate the process. Please advise solution, which i can handle the pop up windows.

Thanks
Navas

2019 April 16 at 15 h 40 min #2440

nava790
Participant

Command for handling popup window

2019 December 27 at 10 h 31 min #4155

paulglagla
Keymaster

Have you tried version 6.1.5 or later ? It should solve your issue.
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Paul Glagla is a video and programming lover who does not have the means to test his software on all possible configurations. They work well on multiple Windows systems from 7.0 or better, so chances are they work well on yours, but maybe not. The only way to find out is to try them! And if you eventually have issues, post a question on the corresponding forum of this site to allow him to improve his products.

Paul Glagla guarantees that the software downloadable on his site is free of viruses, advertising, and malicious code. They respect your system and install nothing without warning you and without it being easily reversible.